Our Blog

Before You Begin

These steps are generally intended for reusing Yealink phones with Broadtela service. You can reuse existing Yealink phones with Broadtela service as long as they are a supported model

Reset Phone to Factory Defaults

Factory Reset your Yealink phone
Power on the phone.
Wait until the “Idle” screen is visible.

Hold down the “OK” button until the message “Reset to factory settings?” appears.

Press “OK” or “Yes” depending on the model.
Your phone has been successfully reset.

Login in to phone

The device web interface (GUI) allows you make changes to the phone’s settings via a web browser on your computer, which can often be more convenient than on the phone screen itself. You must ensure that:

  • The phone is plugged into the network.
  • The computer is on the same network as the phone.
  1. Locate the phone’s IP address by going to Menu > Status > IPv4 on the phones screen.
  2. In a web browser on a computer on the same network as the phone, browse to the phone’s IP address.

Manually Provision Phone into Production

  1. In a web browser on a computer on the same network as the phone, browse to the phone’s IP address.
  2. Log in as admin and enter the password admin.
  3. Navigate to Settings > Auto Provision.
  4. In the Server URL field, enter the Broadtela Provisioning Server address that has been provided matching the MAC Address
  5. Click Autoprovision Now.
  6. Allow several minutes for the phone to reboot and connect to the Broadtela servers.

Comments ( 0 )